Your Glowforge wheel broke right when a big order just came in!? It is the Holiday Rush and your Glowforge Belt is frayed?! Keep this "Oh Shit" kit on hand for any rush season (Especially Christmas).
**Includes **
4x – V Wheels (#3 in the pictures), Temporary replacements for the factory Glowforge laser carriage gantry wheels. I personally ran these wheel for 5 months on my Glowforge.
2x – Pulley Wheels (#1 in the pictures), Temporary replacement for the factory GF Pulley Wheels
Belt Options – Ribbed Gantry Rubber Belt – Replacement Belt for the factory Glowforge Carriage Plate Belt – 48" long
** Belt Options to Choose From** •
• Gantry Belt – Replacement Belt for the factory Glowforge Carriage Plate Belt – 48" long (46 3/8" is the OEM GF belt)
• Side Belt – Replacement Belt for the factory Glowforge Side Tension Belt – 39" long (37 1/8" is the OEM GF belt)
The GF has 1 gantry belt and 2 side belts in it total.
These belts are is slightly longer than needed, it will need trimming during install. The GF belt is a open ended belt that is held via a metal clamp at the correct tension. The 2 belts ends are clamps into your existing belt clamp. You will reuse the metal clamps already on your machine.
** Belt Install Instructions **
https://support.glowforge.com/hc/en-us/articles/360054008834-Replace-the-Carriage-Plate-Belt
https://support.glowforge.com/hc/en-us/articles/4412164762779-Replace-the-side-belt
Pulley wheels are 3D printed out of PLA+. V-Wheels are printed in a stronger PETG.
** Bearing Install Instructions **
Wheels are made to fit the carriage gantry wheels with the 12mm bearing. Just reuse your factory bearing in these new wheels, they are made to be very tight so that they do not wiggle out once pressed in and will take a bit of force to press in
First, have the old bearing out of your old wheel. Then put the new bearing on a flat surface and set the wheel on top, align the bearing with the hole. The bearing is a tight fit, so it needs to go in straight (any angle will cause issues). Pushed, slowly, straight down.
Adjusted it from either side until it was pressed in the middle of the wheel. About 1.5mm of space will be from the top of the bearing to the top of the wheel.
** Disclaimer **
Please follow the above install instructions. The bearing are a TIGHT fit, and if not installed correct the wheel could break.
The bearings are friction fit to account for the heating and cooling of the wheel. They are a tight fit so the bearing does not get skewed when the wheel heats up and expands slightly (the wheel would then cool down leaving the bearing skewed and you'd have a wobbly wheel).
Due to the nature of 3D printed items, there may be slight imperfections that will not affect the laser cutting
Glowforge "Oh Shit" Package, GF Holiday Kit, Replacement V Wheels, Pulley Wheels, Replacement Ribbed Belt, Laser Carriage Belt, 3D Printed
———————
*** Returns & Exchanges ***
We do not accept returns or exchanges on our items due the nature of us creating them at the time of order. Feel free to reach out to us if you have questions.
Any return shipping costs is the buyers responsibility. Items returned to us must be in brand new condition and unused and not broken. If the item is exchanged the shipping costs for the exchanged item is the buyer's responsibility. Refunds are for the price of the item only, original shipping is non-refundable.
EU customers (only EU) have a 14-day window for returns. Return shipping costs is the responsibility of the buyer. Any items that are custom or personalized are not returnable. If the item is exchanged the shipping costs for the exchanged item is the buyer's responsibility. Refunds are for the price of the item only, original shipping is non-refundable.
*** Cancellations ***
Cancellations must be done within 24 hours. We will do our best to cancel but if work has begun on your order, we are not able to cancel it.